Networking
Hi, Today, I want to go through the process of finding a physical device in a network if you only have an IP address or a MAC address. This is my way of doing it, and it is very simple actually. Of course there could be a better way of
Aruba
Hello there. Today I want to write about a project I had over the weekend (from Friday to Monday). This won't have much if any, useful technical information. It will probably just be a short, badly written-story. Over the last weekend, I was at a customer's
Aruba
Take everything you read in this post with a grain of salt. My understanding concerning OSPF is very limited. So there could be some misinformation here. I have been testing a few things in GNS3 over the weekend. One of which was OSPF between a Sophos XG and ArubaOS-CX. It
Aruba
Hello there. This is technically a continuation of the "Aruba 8360 Basic and VSX configuration" post, which is part of a larger project. But I will separate it since this is different hardware. Most of this will be similar to the Aruba 3860 configuration. The main differences will
Aruba
Part 1Part 2 Hey there. This is part 2 of my Aruba 8360 basic and VSX configuration. In this part, I want to go through the VSX and LAG/LACP configuration. I said I would do the configuration on the physical device. This turned out to be a bit of
Aruba
Part 1Part 2 Hello there. Today I want to go through the basic configuration of an Aruba 8360-32Y4C. Such a beautiful device. Look at it... [corefortress_slider id="1"] Aruba 8360-32Y4C. It has 32x 1GbE/10GbE/25GbE ports. 4 of those are with MACsec. On top of that,